$399.99
$449.99
Setting up and storing your Pilates Pro Chair Max with sculpting handles is easy and convenient. Watch the video guide from QVC for an easy step by step visual or review the manual and steps listed below.
You can also download the set-up user manual here.
Unlock the chair legs by pressing the black Leg Safety Lock button.
While pressing the Leg Safety Lock button, push down on the seat to unfold it.
Release the floor pad by removing the Foot Board Pin.
Release the foot pedals by removing the Pedal locking Pin.
Secure the pedal locking pin for safe keeping
Attach the springs from their resting position underneath the seat.
Adjust resistance to desired levels by moving the springs to different levels.
Return the Springs to their resting position, by first detaching the G or J hooked ends first. Then remove the circle end of the springs
Remove the leg Safety lock by pressing the Leg Safety Lock knob located on the underside of the seat.
With the Leg Safety Lock in the unlocked position fold the chair by pushing on the front legs.
Return the floor pad to its upright position and reinsert to Foot Board Pin.
1. Remove the small handles by pushing in the Handle lock button and pulling the handle until it is removed
2. Insert the Tower handles until you hear a click.
3. Place the small handles on the top of the sculpting handles until you hear a click which indicates it has been properly fastened.
Locate the black toggle knob at the end of the foot pedals, push in and turn the knob counterclockwise to release the pedals and disconnect the single pedal position.
To reconnect, align the pedals, push the black toggle knob in, and turn the toggle knob clockwise to connect the split pedals into one.
Still have questions? Find answers on our FAQs page.